Medical beauty mask emulsification production lines
Selling medical beauty masks earns 800 million a year, and
the net profit rate exceeds 50%. Are you not ready to join
the medical beauty industry?!
Frost & Sullivan data shows that only in the medical dressing segment, the penetration rate of recombinant collagen-based medical dressings in the entire medical dressing market has increased from 5.2% in 2017 to 18.5% in 2021. It is estimated that in 2027 will further increase to 26.1%.
The market size of recombinant collagen-based medical dressings will increase from RMB 351 million in 2017 to RMB 4.8 billion in 2021, with a CAGR of 92.2%, and is expected to further increase from RMB 7.2 billion in 2022 to RMB 4.8 billion in 2027. 25.5 billion yuan, with a compound annual growth rate of 28.8%.
Medical beauty mask emulsification production lines, including reactors, concentration tanks, phase inversion/modification tanks, and packaging tanks.
The reactor is respectively connected with the concentration tank and the phase inversion/modification tank, and the phase inversion/modification tank is connected with the packaging tank.
After the raw material is reacted in the reactor, the material is obtained, and the material passes through the concentration tank and the phase inversion/modification tank respectively, and the concentrated material in the concentration tank is then sent to the phase inversion/modification tank for phase inversion/modification to obtain emulsion a.
The Medical beauty mask emulsification is input into the packaging tank, and is transferred to the concentration tank and then concentrated and then input into the packaging tank to obtain the emulsion b.
The input end of the reactor is connected to the raw material tank, the output end is connected to a delivery pump, the delivery pump is connected to a defoaming tank, and the defoaming tank is respectively connected to the phase inversion/modification tank and the concentration tank through a three-way valve.
Compared with the prior art, the beneficial effects of the present invention are:
A degassing structure is set up, which can adsorb and remove the harmful components in the gas in the packaging tank, especially the harmful gas such as voc gas, and then transport the pipeline and the inert gas doped in the emulsion to the inert gas tank for recycling. use. An air-entraining structure is set up to ensure the quality of the emulsion production and synthesis.
The present invention will share the front and rear sections of the two reaction processes of emulsion a and emulsion b and use a three-way valve to insert and switch the difference end, so that the production line can meet the production of different products at the same time, saving manual line change time, improve efficiency and save equipment costs.
Description of drawings
Figure 1 is a schematic diagram of the degassing structure of the present invention.
Here is the equipment you need:
1. reactor,
2. delivery pump,
3. defoaming tank,
4. three-way valve,
5. phase inversion/modification tank,
6. concentration tank ⅰ,
7. double-pipe channels,
8. one-way valve,
9. concentration tank ⅱ,
10. Homogenizer ⅰ,
11. Homogenizer ⅱ,
12. Inert Gas Tank,
13. Degassing Structure,
14. Packing Tank ⅰ,
15. Packing Tank ⅱ,
16. Sealing Box,
17. Pre-stage Filter,
18. Pre-stage Absorption Pump,
19. post-stage filters,
20. air-filling pumps,
21. post-stage absorption pumps.
评论
发表评论